Medtronic Revel Guía de usuario descargar pdf (Pagina 108)

amount less the active insulin (1.5U + 2.5U - 1.5U). This gives 2.5U or 62% of total insulin of 4.0U.

The Square portion consists of the other half of the food insulin (1.5U), which is 38% of total

insulin of 4.0U.

7 The SQUARE DURATION screen appears. Enter the amount of time you want the Square Wave bolus to

last, then press ACT.

NOTE: If you have BG Reminder turned On, the BG REMINDER DURATION screen displays. It allows

you to set the duration before you are reminded to check your blood glucose after a bolus. See the

BG Reminder section in the Basic programming chapter for information about this feature.

8 Press ACT to accept and deliver the bolus. The BOLUS DELIVERY screen appears with an open circle

indicating that your pump is in Special Mode. The pump beeps or vibrates at the start of the bolus.

During bolus delivery, the pump returns to the HOME screen. If you want to see the progress of the

delivery, press ESC to see the STATUS screen. The pump beeps or vibrates at the end of the bolus, and

the open circle disappears.

Easy bolus

The EASY BOLUS button allows a quick way to deliver a Normal bolus. You will preset the settings for

this feature in the EASY BOLUS OPTION screen in the BOLUS MENU. Your pump is sent from the factory

with the Easy Bolus feature set to off. If you want to use Easy Bolus, turn it on.

After you set up Easy Bolus, with each

press, you can increase the Normal bolus amount by a fixed

amount, called a step. Before you can deliver an Easy Bolus, you must set the amount in the EASY BOLUS

ENTRY screen. This amount equals the number of units of insulin for each step. The maximum number of

steps can equal up to your maximum bolus limit. When using vibrate mode, EASY BOLUS is limited to

20 steps or maximum bolus, whichever comes first.

After you set your step amount, you can program your Easy Bolus. When you are in the HOME screen, each

time you press

the Easy Bolus amount increases by one step. You will hear a beep or feel a vibration

for each step increase. Each beep is a different tone. This makes it easy for you to count the beeps while

you are programming your Easy Bolus.

Optimizing pump therapy 87

Chapter 6

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 264 265

Sin comentarios

Medtronic Revel Guía de usuario Pagina 108