Medtronic Revel Guía de usuario descargar pdf (Pagina 169)

4 When programming a bolus, the blood glucose measurement from the meter will appear as the default

blood glucose value on the ENTER BG screen. The pump will not display a reading that is older than 12

minutes on the ENTER BG screen.

5 Do not use the RF meter to send your blood glucose readings to the pump while onboard aircraft.

Manually enter your blood glucose.

CAUTION: The pump will not receive signals from the meter while it has a LOW BATTERY condition. To

ensure the meter communicates with the pump, make sure the pump does not have a low battery.

(Replacing the low battery with a new battery will restore meter-pump communication.)

Add, delete, review meter IDs

The meter programming screens are very similar to those for the remote control. Make sure to select

Meters in the DEVICE OPTIONS screen when programming your meter.

You have to turn on the meter option to add, delete, or review the meter ID(s) programmed in your pump.

To turn on the meter option:

Go to the METER OPTION screen.

Main > Utilities > Connect Devices > Meters

Select On, then press ACT. The METER ID MENU appears.

Add, delete or review your meter ID(s) as desired.

Adding meter IDs

a. Select Add ID, then press ACT.

b. Use the up and down arrow buttons to enter each of the six ID characters. Press ACT after each

entry.

c. After you set the last character of the ID, the screen will return to the METER ID MENU.

Deleting meter IDs

a. Select Delete ID, then press ACT.

b. Select the meter ID that you want to delete and press ACT.

c. The selected ID is now deleted.

Reviewing meter IDs

If you are not sure that your meter ID is entered in your pump, check the REVIEW METER ID screen.

a. Select Review ID, then press ACT.

b. The programmed IDs will show in the REVIEW METER ID screen.

4 Exit the menus when you are done.

Meter option148

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 264 265

Sin comentarios

Medtronic Revel Guía de usuario Pagina 169